Language

Currencies

Your shopping cart is empty.



Pump & Handling

Yamaha GP800/1200/1300R Intake Grate

WR218

Not having a WORX intake grate on a Yamaha GP, is like having a high performance sportscar on a wet road with bald tyres, it is just not possible to get the best from these boats. Performance benefits of our WR218 include: - Better hook up in all conditions - No top speed loss - Better pump load...

  • $225.00
    WR218_Yamaha_GPR_800_1200_GPR_1300_Intake_Grate_2048x2048.jpg

    Yamaha GP800/1200/1300R Intake Grate

  • $225.00
  • Not having a WORX intake grate on a Yamaha GP, is like having a high performance sportscar on a wet road with bald tyres, it is just not possible to get the best from these boats. Performance benefits of our WR218 include: - Better hook up in all conditions - No top speed loss - Better pump load...

    Yamaha Superjet Pump Shoe

    WR06009

    Worx Racing cast aluminium pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified st...

  • $159.00
    WR06009.jpg

    Yamaha Superjet Pump Shoe

  • $159.00
  • Worx Racing cast aluminium pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified st...

    RIVA Yamaha Stainless Steel Wear Ring - 155mm

    YDS-HS-155

    Our heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel ...

  • $319.95
    F144957076.jpg

    RIVA Yamaha Stainless Steel Wear Ring - 155mm

  • $319.95
  • Our heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel ...

    DSS Impeller Shaft Tool Yamaha WR500

    TOOL27

    DSS Impeller Shaft Tool Yamaha WR500 sercures the driveshaft so impeller can be removed and installed easily.

  • $17.95
    f144956244_uf36btsccqqvdp8n.webp

    DSS Impeller Shaft Tool Yamaha WR500

  • $17.95
  • DSS Impeller Shaft Tool Yamaha WR500 sercures the driveshaft so impeller can be removed and installed easily....

    RIVA Yamaha 144mm Stainless Steel Wear Ring (Replaces OEM # 6R7-51312-03-00)

    YBS-HS-144

    Our heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel ...

  • $399.95
    F144939614.jpg

    RIVA Yamaha 144mm Stainless Steel Wear Ring (Replaces OEM # 6R7-51312-03-00)

  • $399.95
  • Our heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel ...

    BLOWSION Stand-up Tubbie I Freeride Hull Sponsons

    02-01-002

    Blowsion "Tubbie" Sponsons dramatically improve the stability and handling of your craft. They attach to the sides of the hull under the bond flange widening the hull for improved performance and handling. Tubbie I's add stability while providing looser, more forgiving handling for freeride applicat...

  • $249.00
    M144777931.jpg

    BLOWSION Stand-up Tubbie I Freeride Hull Sponsons

  • $249.00
  • Blowsion "Tubbie" Sponsons dramatically improve the stability and handling of your craft. They attach to the sides of the hull under the bond flange widening the hull for improved performance and handling. Tubbie I's add stability while providing looser, more forgiving handling for freeride applicat...

    BLOWSION Stand-up Tubbie II Race Hull Sponsons

    02-01-003

    The Tubbie II Race Model has a recessed, concave shape in the bottom leading edge to create a harder / sharper edge for turning and tracking. This provides better grip in corners and more high speed stability in the straightaways. For recreational and freeride we recommend the Tubbie I's....

  • $249.00
    M144777929.jpg

    BLOWSION Stand-up Tubbie II Race Hull Sponsons

  • $249.00
  • The Tubbie II Race Model has a recessed, concave shape in the bottom leading edge to create a harder / sharper edge for turning and tracking. This provides better grip in corners and more high speed stability in the straightaways. For recreational and freeride we recommend the Tubbie I's....

    BLOWSION Stand-up Tubbie MIII Race Hull Sponsons

    02-01-004

    We asked our riders and customers...we got a lot of feed back... we listened. Introducing the Tubbie MIII. We call it the SlimPhast Sponson. Not a cheap plastic ripoff copy but the real deal. With this Blowsion patented two-plane technology we have slimmed, trimmed and re-defined the patented Tub...

  • $249.00
    M123055207.jpg

    BLOWSION Stand-up Tubbie MIII Race Hull Sponsons

  • $249.00
  • We asked our riders and customers...we got a lot of feed back... we listened. Introducing the Tubbie MIII. We call it the SlimPhast Sponson. Not a cheap plastic ripoff copy but the real deal. With this Blowsion patented two-plane technology we have slimmed, trimmed and re-defined the patented Tub...

    BLOWSION Yamaha SuperJet 2008-21 & FX-1 Tubbie Destroyer Hull Sponsons

    02-01-012

    Trying to improve on an already amazing product? The Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer SuperJet as well as the Yamaha Fx1 contour, the Tubbie Destroyer is f...

  • $499.95
    F100238346.jpg

    BLOWSION Yamaha SuperJet 2008-21 & FX-1 Tubbie Destroyer Hull Sponsons

  • $499.95
  • Trying to improve on an already amazing product? The Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer SuperJet as well as the Yamaha Fx1 contour, the Tubbie Destroyer is f...

    TBM Kawasaki 800 SX-R & 750 SXi/SX Super Pump Cone

    TBM120

    Transform your OEM pump into a high performing large hub, high pressure, axial flow design with this inexpensive bolt-on upgrade. Designed to improve hole shot, hook-up and top speed performance through added pump efficiency and thrust. Allows impeller changes to be made easily. Includes three inter...

  • $549.95
    F123100115.jpg

    TBM Kawasaki 800 SX-R & 750 SXi/SX Super Pump Cone

  • $549.95
  • Transform your OEM pump into a high performing large hub, high pressure, axial flow design with this inexpensive bolt-on upgrade. Designed to improve hole shot, hook-up and top speed performance through added pump efficiency and thrust. Allows impeller changes to be made easily. Includes three inter...

    TBM Racing Kawasaki SX-R 800 Signature Series Ride Plate

    TBM123

    TBM Racing Kawasaki SX-R 800 Signature Series Ride Plate - Race Price: $249.00 Ask a question about this product After nearly 5 years of production we have finally found a way to enhance the performance of our premier SX-R ride plate by utilizing the triangular windows that Mike Klippenstein m...

  • $399.95
    TBM123.jpg

    TBM Racing Kawasaki SX-R 800 Signature Series Ride Plate

  • $399.95
  • TBM Racing Kawasaki SX-R 800 Signature Series Ride Plate - Race Price: $249.00 Ask a question about this product After nearly 5 years of production we have finally found a way to enhance the performance of our premier SX-R ride plate by utilizing the triangular windows that Mike Klippenstein m...

    TBM Yamaha SuperJet Super Pump Cone

    TBM120-YAM

    The TBM Yamaha Super Pump Cone will transform your inefficient OEM pump into a high performance large diameter hub race pump. It is not necessary to run a large hub impeller, so there is no need to purchase a new impeller to benefit from our Yamaha Super Pump Cone. We have designed our Yamaha Super ...

  • $549.95
    F123100115.jpg

    TBM Yamaha SuperJet Super Pump Cone

  • $549.95
  • The TBM Yamaha Super Pump Cone will transform your inefficient OEM pump into a high performance large diameter hub race pump. It is not necessary to run a large hub impeller, so there is no need to purchase a new impeller to benefit from our Yamaha Super Pump Cone. We have designed our Yamaha Super ...

    WORX Kawasaki 750 SX/SXI Ride Plate

    WR303

    This ride plate is a direct bolt on replacement The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling and allows the boat to stay flatter in...

  • $305.00
    WR303.JPG

    WORX Kawasaki 750 SX/SXI Ride Plate

  • $305.00
  • This ride plate is a direct bolt on replacement The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling and allows the boat to stay flatter in...

    WORX Kawasaki SX/SXI Ride Plate

    WR307

    This ride plate is a direct bolt on replacement for all recreational or competition SXI's allowing most riders to ride faster while expending less energy. Extra length holds the boat a lot flatter Hard chine lines on the edges of the plate make it a lot easier to carve those really tight ...

  • $425.00
    wr307.jpg

    WORX Kawasaki SX/SXI Ride Plate

  • $425.00
  • This ride plate is a direct bolt on replacement for all recreational or competition SXI's allowing most riders to ride faster while expending less energy. Extra length holds the boat a lot flatter Hard chine lines on the edges of the plate make it a lot easier to carve those really tight ...

    WORX Ride Plate for Kawasaki 750 SXI Pro, 800 SX-R

    WR306

    This ride plate is a direct bolt on replacement for all recreational or competition SXI Pro's and SXR 800's allowing most riders to ride faster while expending less energy. The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate hol...

  • $425.00
    wr306.jpg

    WORX Ride Plate for Kawasaki 750 SXI Pro, 800 SX-R

  • $425.00
  • This ride plate is a direct bolt on replacement for all recreational or competition SXI Pro's and SXR 800's allowing most riders to ride faster while expending less energy. The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate hol...

    RIVA Yamaha 2008+ SuperJet Performance Ride Plate

    RY21011

    Key Benefits Include: Superior handling performance. Quicker planing & improved top speed. Reduced porposing. Traction Vent provides incredible cornering. Race bred design. Improves acceleration, cornering and straight line handling. Powder coated to prevent corrosion. IJSBA/APBA Race Legal....

  • $214.95
    F144956094.jpg

    RIVA Yamaha 2008+ SuperJet Performance Ride Plate

  • $214.95
  • Key Benefits Include: Superior handling performance. Quicker planing & improved top speed. Reduced porposing. Traction Vent provides incredible cornering. Race bred design. Improves acceleration, cornering and straight line handling. Powder coated to prevent corrosion. IJSBA/APBA Race Legal....

    RIVA/Solas Yamaha 62T Stainless Steel Pump - 12-vane/144mm

    YQS-SV-144

    RIVA's Stainless Steel Race Pumps deliver increased acceleration & top speed along with reduced cavitation. Designed for high performance applications that exceed the limits of original pump efficiency. Features computer designed stator vane section that is far more efficient than stock. Constructed...

  • Retail Price
    $532.95
  •  
  • Discounted Price
    $506.30

  • Save: 5% off
    f144939623_5cxwh9mwvbcittq7.webp

    RIVA/Solas Yamaha 62T Stainless Steel Pump - 12-vane/144mm

  • Retail Price
    $532.95
  •  
  • Discounted Price
    $506.30

  • Save: 5% off

    RIVA's Stainless Steel Race Pumps deliver increased acceleration & top speed along with reduced cavitation. Designed for high performance applications that exceed the limits of original pump efficiency. Features computer designed stator vane section that is far more efficient than stock. Constructed...

    TBM RACING YAMAHA SIGNATURE SERIES RIDE PLATE 08-newer

    TBM123-Y08

    When the 2008 Yamaha Superjet was released we were chomping at the bit to get our hands on one and start developing the ultimate ride plate for this exciting new ski. At first glance you may think we simply adapted our SX-R or Hydrospace ride plates to the new Yamaha, but that is far from the truth....

  • $399.95
    1373315171447344520379.jpeg

    TBM RACING YAMAHA SIGNATURE SERIES RIDE PLATE 08-newer

  • $399.95
  • When the 2008 Yamaha Superjet was released we were chomping at the bit to get our hands on one and start developing the ultimate ride plate for this exciting new ski. At first glance you may think we simply adapted our SX-R or Hydrospace ride plates to the new Yamaha, but that is far from the truth....

    Solas Yamaha Super Jet Impeller YB-CD-13/17

    YB-CD-13/17

    Solas Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.

  • Retail Price
    $262.95
  •  
  • Discounted Price
    $215.96

  • Save: 18% off
    YBCD1317.jpg

    Solas Yamaha Super Jet Impeller YB-CD-13/17

  • Retail Price
    $262.95
  •  
  • Discounted Price
    $215.96

  • Save: 18% off

    Solas Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation....

    Solas Yamaha YB-SC-J (14.7/18.5) Impeller

    YB-SC-J

    Solas Concord and Super Camber Impellers will increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation....

  • Retail Price
    $194.95
  •  
  • Discounted Price
    $175.46

  • Save: 10% off
    solas_imp.jpg

    Solas Yamaha YB-SC-J (14.7/18.5) Impeller

  • Retail Price
    $194.95
  •  
  • Discounted Price
    $175.46

  • Save: 10% off

    Solas Concord and Super Camber Impellers will increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation....

    WORX Maxiloader Intake Grate for 2008+ Yamaha Superjet

    WR228

    - Specifically designed of the 2008+ Superjet Hull - Deeper scoop for improved hook up and turning - Great in rough water and for surf riding - Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate ...

  • $225.00
    wr228_large.jpg

    WORX Maxiloader Intake Grate for 2008+ Yamaha Superjet

  • $225.00
  • - Specifically designed of the 2008+ Superjet Hull - Deeper scoop for improved hook up and turning - Great in rough water and for surf riding - Wide and deep pick up area which not only loads the pump but allows you to ride hard up to a turn buoy and then when you come off the throttle the grate ...

    WORX Maxiloader Rickter Style Freestyle Intake Grate

    WR242

    Our Rickter Grate was the world's first intake grate designed specifically for the popular Rickter Hull. Designed in conjunction with some of the worlds finest freestyle riders this grate will fit the entire Rickter Hull range and also various other aftermarket hulls - including the 2014 Krash Preda...

  • $225.00
    wr242_large.jpg

    WORX Maxiloader Rickter Style Freestyle Intake Grate

  • $225.00
  • Our Rickter Grate was the world's first intake grate designed specifically for the popular Rickter Hull. Designed in conjunction with some of the worlds finest freestyle riders this grate will fit the entire Rickter Hull range and also various other aftermarket hulls - including the 2014 Krash Preda...

    WORX Superjet Intake grate for 1991-2007

    WR205

    This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation. For...

  • $225.00
    oldsjgrate.png

    WORX Superjet Intake grate for 1991-2007

  • $225.00
  • This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation. For...

    WORX Maxiloader Intake Grate for 03+ 800 SX-R

    WR225

    This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water. If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you. The WR225 has ...

  • $225.00
    wr225.jpg

    WORX Maxiloader Intake Grate for 03+ 800 SX-R

  • $225.00
  • This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water. If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you. The WR225 has ...

    WORX Maxiloader Intake grate for 03+ 800 SX-R

    WR222

    Deeply scooped grate for better hook up. Perfectly matched to enable easy installation. The Worx Intake Grate is a must for any one wanting to get the best from their new SX-R. In testing we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and Wo...

  • $225.00
    WR222.jpg

    WORX Maxiloader Intake grate for 03+ 800 SX-R

  • $225.00
  • Deeply scooped grate for better hook up. Perfectly matched to enable easy installation. The Worx Intake Grate is a must for any one wanting to get the best from their new SX-R. In testing we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and Wo...

    WORX Maxiloader Intake Grate for Kawasaki 440/550

    WR204

    Benefits of this intake grate include: Reduced porpoising Minimal to zero top speed loss (up to 3mph gain in choppy conditions!) Greater control & turning capability

  • $181.00
    wr204.jpg

    WORX Maxiloader Intake Grate for Kawasaki 440/550

  • $181.00
  • Benefits of this intake grate include: Reduced porpoising Minimal to zero top speed loss (up to 3mph gain in choppy conditions!) Greater control & turning capability...

    WORX Freeride Ride Plate for 2008 and older Yamaha Superjet

    WR315

    - Designed 100% for surf - Inspired by the infamous swallow tail surfboard, the centre nub has been incorporated into the design to help track the ski on the face of a wave while the large cut outs allow the boat freedom to move - Fits Pre 2008 Superjets only...

  • $240.00
    new sj plate.png

    WORX Freeride Ride Plate for 2008 and older Yamaha Superjet

  • $240.00
  • - Designed 100% for surf - Inspired by the infamous swallow tail surfboard, the centre nub has been incorporated into the design to help track the ski on the face of a wave while the large cut outs allow the boat freedom to move - Fits Pre 2008 Superjets only...

    WORX Freeride Ride Plate for 2008+ Superjet

    WR314

    Benefits include: - Proudly designed in conjunction with Ross Champion - Suitable for Freeride and Freestyle riding - D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tail whips and aerial moves Please note we do NOT recommended this plate for...

  • $365.00
    oldsjplate.png

    WORX Freeride Ride Plate for 2008+ Superjet

  • $365.00
  • Benefits include: - Proudly designed in conjunction with Ross Champion - Suitable for Freeride and Freestyle riding - D-cut design to allow the wave rider and freestyler to break the rear end loose with ease for tail whips and aerial moves Please note we do NOT recommended this plate for...

    WORX Freestyle Ride Plate for 2008+ Yamaha Superjet

    WR312

    Benefits Include: Specifically designed for the 2008 Superjet hull Better drive and control - Greater stability

  • $250.00
    wr312.jpg

    WORX Freestyle Ride Plate for 2008+ Yamaha Superjet

  • $250.00
  • Benefits Include: Specifically designed for the 2008 Superjet hull Better drive and control - Greater stability...

    WORX Freestyle Ride Plate for 1991-2007 Yamaha Superjet

    WR308

    Reduced length allows more control over ski in freestyle maneouvers while helping to keep hooked up during turns where the ski is leaned way over Designed by Freestylers for Freestyle Widely regarded as the best freestyle plate available for the Superjet D cut-out with the to keep the boat ...

  • $305.00
    wr308.jpg

    WORX Freestyle Ride Plate for 1991-2007 Yamaha Superjet

  • $305.00
  • Reduced length allows more control over ski in freestyle maneouvers while helping to keep hooked up during turns where the ski is leaned way over Designed by Freestylers for Freestyle Widely regarded as the best freestyle plate available for the Superjet D cut-out with the to keep the boat ...

    WORX Dominator Ride Plate for 1991-2007 Superjet

    WR305

    Designed for 1991-07 Superjet D cut-out design allowing you to push the boat hard into turns and provides greater stability and less tendance to slide out Extra length to hold the boat flatter Bevelled leading edge on the “D” cut-out that picks up water when the bow of the boat starts t...

  • $425.00
    wr305.jpg

    WORX Dominator Ride Plate for 1991-2007 Superjet

  • $425.00
  • Designed for 1991-07 Superjet D cut-out design allowing you to push the boat hard into turns and provides greater stability and less tendance to slide out Extra length to hold the boat flatter Bevelled leading edge on the “D” cut-out that picks up water when the bow of the boat starts t...

    WORX Yamaha Wave Blaster 1 & 2 Ride Plate

    WR301

    Longer than the stock unit, with sharper edges this ride plate will get you on the plane quicker and let you turn harder without letting go. Great in rough water and in the surf.

  • $345.00
    wr301.jpg

    WORX Yamaha Wave Blaster 1 & 2 Ride Plate

  • $345.00
  • Longer than the stock unit, with sharper edges this ride plate will get you on the plane quicker and let you turn harder without letting go. Great in rough water and in the surf....

    WORX Kawasaki SX-R 800 Ride Plate

    WR311

    This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out The wider tail section and the double concaves together with the '...

  • $400.00
    wr311.jpg

    WORX Kawasaki SX-R 800 Ride Plate

  • $400.00
  • This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out The wider tail section and the double concaves together with the '...

    WORX Kawasaki SX-R 800 Ride Plate

    WR310

    This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year....

  • $340.00
    wr310.jpg

    WORX Kawasaki SX-R 800 Ride Plate

  • $340.00
  • This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year....

    WORX Yamaha Superjet Sponsons

    WR544

    Adjustable to suit your individual riding style and ability Constructed from Marine Grade Aluminium Suitable for ALL styles of riding Also compatabile with various aftermarket hulls

  • $150.00
    wr544.jpg

    WORX Yamaha Superjet Sponsons

  • $150.00
  • Adjustable to suit your individual riding style and ability Constructed from Marine Grade Aluminium Suitable for ALL styles of riding Also compatabile with various aftermarket hulls...

    WORX Sponsons for Kawasaki SX-R

    WR528

    This was the first all new standup model ski to be released by Kawasaki since 1992. It has a new 800cc engine and is extremely popular for racing and recreational riding. Worx has two different types of ride plate WR310, WR311 and intake grates WR222, WR225 for this boat and these sponsons work well...

  • $150.00
    WR528.jpg

    WORX Sponsons for Kawasaki SX-R

  • $150.00
  • This was the first all new standup model ski to be released by Kawasaki since 1992. It has a new 800cc engine and is extremely popular for racing and recreational riding. Worx has two different types of ride plate WR310, WR311 and intake grates WR222, WR225 for this boat and these sponsons work well...

    Rick Roy Carbon Ninja Pump Flow Guard 144mm

    FL-GD-NIN1-CB(144-YAM)

    This innovative Pump Flow Guard from RRP/Ninja helps to increase performance and to gain more height for aerial maneuvers. It allows for full functionality of the steering nozzle and trim system. Prevents the water flow from the outside of the pump entering between the restriction and steering noz...

  • $499.00
    M144776898.jpg

    Rick Roy Carbon Ninja Pump Flow Guard 144mm

  • $499.00
  • This innovative Pump Flow Guard from RRP/Ninja helps to increase performance and to gain more height for aerial maneuvers. It allows for full functionality of the steering nozzle and trim system. Prevents the water flow from the outside of the pump entering between the restriction and steering noz...

    Rick Roy Carbon Ninja Pump Flow Guard 155mm

    FL-GD-NIN1-CB(155-YAM)

    This innovative Pump Flow Guard from RRP/Ninja helps to increase performance and to gain more height for aerial maneuvers. It allows for full functionality of the steering nozzle and trim system. Prevents the water flow from the outside of the pump entering between the restriction and steering noz...

  • $499.00
    M144776899.jpg

    Rick Roy Carbon Ninja Pump Flow Guard 155mm

  • $499.00
  • This innovative Pump Flow Guard from RRP/Ninja helps to increase performance and to gain more height for aerial maneuvers. It allows for full functionality of the steering nozzle and trim system. Prevents the water flow from the outside of the pump entering between the restriction and steering noz...

    M134632693.jpg

    Rick Roy FS-2 Ride Plate - FS/FR, EVO and EDGE hulls - Medium

  • $199.99
  • Rickter FS-2 Ride Plate...

    M134632694.jpg

    Rick Roy FS-2 Ride Plate - FS/FR, EVO and EDGE hulls - Small

  • $199.99
  • Rickter FS-2 Ride Plate...

    Rick Roy Intake Grate Aluminum (Wing Trim)

    INT-GR-AL

    Rickter aluminum intake grate (wing trim)

  • $239.00
    M134846677.jpg

    Rick Roy Intake Grate Aluminum (Wing Trim)

  • $239.00
  • Rickter aluminum intake grate (wing trim)...

    Rick Roy Rickter Intake Grate Aluminum

    INT-GR-AL-UN

    Rick Roy Rickter Intake Grate Aluminum (Wing unTrim).

  • $239.00
    M144778468.jpg

    Rick Roy Rickter Intake Grate Aluminum

  • $239.00
  • Rick Roy Rickter Intake Grate Aluminum (Wing unTrim)....

    Rick Roy TeXtreme Ninja Pump Flow Guard 155mm

    FL-GD-NIN1-F-BLK-TXT(155-YAM)

    This innovative Pump Flow Guard from RRP/Ninja helps to increase performance and to gain more height for aerial maneuvers. It allows for full functionality of the steering nozzle and trim system. Prevents the water flow from the outside of the pump entering between the restriction and steering n...

  • $569.00
    M144779693.jpg

    Rick Roy TeXtreme Ninja Pump Flow Guard 155mm

  • $569.00
  • This innovative Pump Flow Guard from RRP/Ninja helps to increase performance and to gain more height for aerial maneuvers. It allows for full functionality of the steering nozzle and trim system. Prevents the water flow from the outside of the pump entering between the restriction and steering n...

    M134901641.jpg

    Rick Roy XFR/XFS Ride Plate

  • $199.00
  • XFS ride plate...

    Rick Roy XFS/XFR Ride Plate - Medium

    XFS/XFR-RD-PLT-M

    Rickter Ride Plate for XFS/XFR's Hulls - Medium.

  • $305.00
    M144779892.jpg

    Rick Roy XFS/XFR Ride Plate - Medium

  • $305.00
  • Rickter Ride Plate for XFS/XFR's Hulls - Medium....

    Rick Roy XFS/XFR Ride Plate - Short

    XFS/XFR-RD-PLT-S

    Rick Roy Rickter Ride Plate for XFS/XFR's Hulls - Short.

  • $285.00
    M144779891.jpg

    Rick Roy XFS/XFR Ride Plate - Short

  • $285.00
  • Rick Roy Rickter Ride Plate for XFS/XFR's Hulls - Short....

    Rick Roy 144mm Trim System Kit

    RRP-TRIM-144

    RRP designed a trim system super easy to operate; the trim ring is pulled from the top making it effortless to activate. It allows better control for the rider. The top pull pivot is adjustable to control the amount of trim needed. Also one of the key features of our trim system is the tight clearan...

  • $699.00
    M144776902.jpg

    Rick Roy 144mm Trim System Kit

  • $699.00
  • RRP designed a trim system super easy to operate; the trim ring is pulled from the top making it effortless to activate. It allows better control for the rider. The top pull pivot is adjustable to control the amount of trim needed. Also one of the key features of our trim system is the tight clearan...

    Rick Roy 155mm Trim System Kit

    RRP-TRIM-155

    RRP designed a trim system super easy to operate; the trim ring is pulled from the top making it effortless to activate. It allows better control for the rider. The top pull pivot is adjustable to control the amount of trim needed. Also one of the key features of our trim system is the tight clearan...

  • $799.00
    M144776903.jpg

    Rick Roy 155mm Trim System Kit

  • $799.00
  • RRP designed a trim system super easy to operate; the trim ring is pulled from the top making it effortless to activate. It allows better control for the rider. The top pull pivot is adjustable to control the amount of trim needed. Also one of the key features of our trim system is the tight clearan...

    Rick Roy Coupler Rubber Dampner

    RRP-EG-DAMP

    Rick Roy Coupler Rubber Dampner.

  • $20.00
    M144778429.jpg

    Rick Roy Coupler Rubber Dampner

  • $20.00
  • Rick Roy Coupler Rubber Dampner....

    Rick Roy Rickter Foot Hold Set

    RICKTER-FT-HOLD

    Rick Roy Rickter Foot Hold Set.

  • $135.00
    M144778418.jpg

    Rick Roy Rickter Foot Hold Set

  • $135.00
  • Rick Roy Rickter Foot Hold Set....

    Solas Kawasaki SXR-1500 12 Vein Jet Pump (new style)

    KGX-PM-148/74T

    The Solas 12-Vane Stainless Steel Pump is a direct bolt-on performance upgrade. The one-piece investment cast stainless steel pump offers improved bottom-end acceleration, improved hook-up, and up to 2 mph top speed gain over OEM pump. Kit comes complete with bearings, seals, shaft, pump cone, reduc...

  • $1,395.00
    F144794780.jpg

    Solas Kawasaki SXR-1500 12 Vein Jet Pump (new style)

  • $1,395.00
  • The Solas 12-Vane Stainless Steel Pump is a direct bolt-on performance upgrade. The one-piece investment cast stainless steel pump offers improved bottom-end acceleration, improved hook-up, and up to 2 mph top speed gain over OEM pump. Kit comes complete with bearings, seals, shaft, pump cone, reduc...

    Rick Roy Plastic Pump Shoe

    PM-SH-PLAS-144

    Rick Roy Plastic Pump Shoe for Rickter hull and Super-Jet with 144mm to 148mm pumps.

  • $89.00
    M144778467.jpg

    Rick Roy Plastic Pump Shoe

  • $89.00
  • Rick Roy Plastic Pump Shoe for Rickter hull and Super-Jet with 144mm to 148mm pumps....

    The GreenHulk PWC Performance Parts Store has been the number one trusted source for PWC enthusiasts since 2006. We carry only the aftermarket parts and accessories for your Sea Doo, Yamaha Waverunner and Kawasaki Jetski that have been tested and proven. In addition, most of our performance parts have been discussed in great depth by some of the most skilled PWC tuners in the world on our forums at GreenHulk.net. In addition to personal watercraft performance upgrades, we sell factory OEM replacement parts for all skis, Honda, Yamaha, Kawasaki, Suzuki and Can-Am dirt bikes, street bikes, Quads, ATV, UTV and Yamaha outboards.

    We offer the absolute best customer service in the industry, guaranteed. We look forward to serving your needs!